A pre­mium ad­he­sive, de­signed for the

in­stal­la­tion of vinyl and rub­ber floor cov­er­ings on porous and non­porous sub­strates. UZIN KE 2000 S has good shear strength, ex­cel­lent re­sis­tance to plas­ti­ciz­ers and is quick dry­ing,

al­low­ing for fast in­stal­la­tions.

A universal, trowelable, fast setting, low slump patching and repair compound for any depth. This fine, cement-based material is suitable for filling holes, cracks and making general surface repairs to concrete substrates. It is also recommended for smoothing and repair work on concrete stairs and for ramping transition areas. It is a fast drying, high strength, easy to sand compound suitable for most floor coverings including wood products in areas with heavy wear demands.

UZIN NC 150 is a cementitious, self-leveling and smoothing compound formulated for use at depths up to 1” (25 mm). It works well for producing level, flat surfaces with high absorbency for standard preparation and cost effective installations in areas with normal wear demands.

A premium, fiber-reinforced, wet set adhesive designed for the installation of vinyl and rubber flooring on porous substrates. This hard setting, high shear strength adhesive has excellent resistance to indentations and shrinkage and is especially effective in areas where rolling loads and furniture are in use.

UZIN NC 886 is a rapid setting, quick drying smoothing compound for repair, filling and patching. It can be used on a variety of substrates to repair subfloor imperfections prior to the installation of most flooring products. UZIN NC 886 has very fine aggregates enabling it to be applied by trowel from a true featheredge up to 1/2" (12.5 mm) depth in a single application. It has excellent bonding properties to a variety of different substrates, often without the use of a primer. The quick drying formulation of UZIN NC 886 allows for most floor coverings to be installed within 15 – 20 minutes on absorbent substrates. UZIN NC 886 is an ideal material for skim coating and covering/smoothing minor imperfections. 

UZIN NC 157 is a very low emission, rapid setting, cement self-leveling compound, formulated for use up to 2" (50 mm) maximum depth. It works well for producing level or flat surfaces with high absorbency for standard preparation and cost effective installation applications in areas with normal wear demands.

A 2-component polyurethane adhesive ideal for the installation of all types of floor coverings that demand reliable bonding in extreme conditions. Suitable for floor covering installations subject to heavy use and rolling loads, UZIN KR 430 cures to an extremely high final strength and hardness with excellent resistance to plasticizers, surface moisture and temperature exposure.

UZIN NC 888 is a fast drying highly versatile smoothing compound for repair, filling and patching. It can be used on a wide range of substrates to repair subfloor imperfections prior to installation of most flooring products. UZIN NC 888 has very fine aggregates enabling it to be applied by trowel from a true featheredge up to 1" (25 mm) depth in a single application. It has superior bonding properties to plywood, concrete, ceramic tile, terrazzo, and old non-water soluble adhesive residues including properly prepared cutback adhesive residues without the use of a primer. It is quick drying cement which allows for most floor coverings to be installed within 15 minutes on absorbent substrates. UZIN NC 888 is an ideal material for covering /smoothing minor imperfections, holes, trowel marks, skim coating and ramping.